- Online form
- Technical assistance

To Learn More about ClickTouch America.

Have we succeeded in bringing your attention towards one or several characteristics which differentiates ClickTouch from its competitors? In this case, we would be glad to provide a prompt answer to any of your queries.

To learn more about our unique ClickTouch technology, or to get further information on our many products and services, please have a look at our corporate brochure.

For the technical guide: ClickTouchTechnicalSpecs_en.pdf
For the corporate brochure: Clicktouch america brochure_en.pdf

Technical specifications relative to our keypads.

In keeping with our ClickTouch Technology, these are the typical* specifications of our membrane keypads:

ELECTRICAL
Contact Resistance (0.039”, 1mm width)	1.25 Ohms/in (0.5 Ohms/cm)
Contact Bounce	<10 ms
Insulation Resistance	100 MOhms
Capacitance	< 20 pF between 2 traces
Switchable Power	300 mW maximum (max: 30 V, 30 mA)
ENVIRONMENTAL
Storage temperature	- 40°F to +176°F (-40°C to +80°C)
Operating temperature	- 40°F to +153°F (-40°C to +67°C)
Sealing	Up to NEMA 4X (IP67)
Chemical resistance	Excellent resistance to most common materials: ethanol, alkali (50% caustic soda), battery acid (30% sulphuric acid), methanol, hydrochloric acid (3N), citric acid (1N), antifreeze, insecticide, cola, disinfectant, motor oil, detergent…
MECHANICAL
Key Design (diameter)	0.236” to 1.378” (6mm to 35mm)
Key Travel (distance)	0.031” to 0.079” (0.8mm to 2.0mm)
Key actuating pressure	1N to 6N (100g to 600g) (3.6oz to 21oz)
Switching life	Up to 5 million actuations.
Connector pitch	0.100”, 0.050” or 0.039” (2.54mm, 1.27mm or 1.00mm). Custom pitches also available.*
Typical switch thickness	0.014” to 0.079” (0.35mm to 2.00mm)

(*) The keypad specifications can vary according to the client’s application.
For further information, please contact our technical support department.